|
|
Posted at 1/12/2015 13:28:18
Only Author
5#
Full boot msg in multi-user mode
https://github.com/tsgan/rockchip/blob/ ... i-user.txt
- DDR Version 1.00 20141007
- In
- SRX
- Channel a: DDR3 200MHz
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- Channel b: DDR3 200MHz
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- OUT
- U-Boot 2014.10-RK3288-01-gadc60cd-dirty (Jan 10 2015 - 11:21:08)
- CPU: rk3288
- CPU's clock information:
- arm pll = 600000000HZ
- periph pll = 297000000HZ
- ddr pll = 200000000HZ
- codec pll = 384000000HZ
- Board: Rockchip platform Board
- DRAM: Found dram banks:1
- Adding bank:0000000000000000(0000000080000000)
- 128 MiB
- storage init OK!
- Using default environment
- GetParam
- check parameter success
- Unknow param: MACHINE_MODEL:rk30sdk!
- Unknow param: MACHINE_ID:007!
- Unknow param: MANUFACTURER:RK30SDK!
- Unknow param: PWR_HLD: 0,0,A,0,1!
- failed to prepare fdt from boot!
- power key: bank-0 pin-5
- can't find dts node for ricoh619
- pmic:act8846
- Can't find dts node for fuel guage cw201x
- SecureBootEn = 0, SecureBootLock = 0
- #Boot ver: 2015-01-10#2.19
- sn:1006120001000186
- unknown reboot type 1
- no fuel gauge found
- no fuel gauge found
- read logo_on switch from dts [0]
- no fuel gauge found
- SecureBootEn = 0, SecureBootLock = 0
- failed to find part:04bf0000
- kernel @ 0x60400000 (0x004ea724)
- ramdisk @ 0x04bf0000 (0x00000000)
- Secure Boot state: 0
- bootrk: do_bootm_linux...
- Starting kernel ...
- in initarm 6
- in initarm 7
- in initarm 8
- in initarm 9
- in initarm 10
- in initarm 101
- in initarm 11
- in initarm 12
- KDB: debugger backends: ddb
- KDB: current backend: ddb
- in initarm 17
- Copyright (c) 1992-2015 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.0-CURRENT #159 r276691M: Mon Jan 12 12:51:13 ULAT 2015
- tsgan@beastie.micom.mng.net:/usr/obj/arm.armv6/usr/src/sys/FIREFLY arm
- FreeBSD clang version 3.5.0 (tags/RELEASE_350/final 216957) 20141124
- WARNING: WITNESS option enabled, expect reduced performance.
- WARNING: DIAGNOSTIC option enabled, expect reduced performance.
- CPU: Cortex A17 rev 1 (Cortex-A core)
- Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
- WB disabled EABT branch prediction enabled
- LoUU:2 LoC:3 LoUIS:2
- Cache level 1:
- 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
- 32KB/64B 4-way instruction cache Read-Alloc
- Cache level 2:
- 1024KB/64B 16-way unified cache WB Read-Alloc Write-Alloc
- real memory = 2147479552 (2047 MB)
- avail memory = 2091266048 (1994 MB)
- random device not loaded/active; using insecure pseudo-random number generator
- random: entropy device infrastructure driver
- random: selecting highest priority adaptor <Dummy>
- random: SOFT: yarrow init()
- random: selecting highest priority adaptor <Yarrow>
- ofwbus0: <Open Firmware Device Tree>
- simplebus0: <Flattened device tree simple bus> on ofwbus0
- gic0: <ARM Generic Interrupt Controller> mem 0xffc01000-0xffc01fff,0xffc02000-0xffc02fff on simplebus0
- gic0: pn 0x20, arch 0x2, rev 0x1, implementer 0x43b irqs 192
- generic_timer0: <ARMv7 Generic Timer> irq 29,30,27,26 on simplebus0
- Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
- Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
- rk30_pmu0: <RK30XX PMU> mem 0xff730000-0xff7300ff on simplebus0
- rk30_grf0: <RK30XX General Register File> mem 0xff770000-0xff771fff on simplebus0
- gpio0: <Rockchip RK30XX GPIO controller> mem 0xff750000-0xff7500ff irq 113 on simplebus0
- gpioc0: <GPIO controller> on gpio0
- gpiobus0: <GPIO bus> on gpio0
- gpio1: <Rockchip RK30XX GPIO controller> mem 0xff780000-0xff7800ff irq 114 on simplebus0
- gpioc1: <GPIO controller> on gpio1
- gpiobus1: <GPIO bus> on gpio1
- gpio2: <Rockchip RK30XX GPIO controller> mem 0xff790000-0xff7900ff irq 115 on simplebus0
- gpioc2: <GPIO controller> on gpio2
- gpiobus2: <GPIO bus> on gpio2
- gpio3: <Rockchip RK30XX GPIO controller> mem 0xff7a0000-0xff7a00ff irq 116 on simplebus0
- gpioc3: <GPIO controller> on gpio3
- gpiobus3: <GPIO bus> on gpio3
- gpio4: <Rockchip RK30XX GPIO controller> mem 0xff7b0000-0xff7b00ff irq 117 on simplebus0
- gpioc4: <GPIO controller> on gpio4
- gpiobus4: <GPIO bus> on gpio4
- gpio5: <Rockchip RK30XX GPIO controller> mem 0xff7c0000-0xff7c00ff irq 118 on simplebus0
- gpioc5: <GPIO controller> on gpio5
- gpiobus5: <GPIO bus> on gpio5
- gpio6: <Rockchip RK30XX GPIO controller> mem 0xff7d0000-0xff7d00ff irq 119 on simplebus0
- gpioc6: <GPIO controller> on gpio6
- gpiobus6: <GPIO bus> on gpio6
- gpio7: <Rockchip RK30XX GPIO controller> mem 0xff7e0000-0xff7e00ff irq 120 on simplebus0
- gpioc7: <GPIO controller> on gpio7
- gpiobus7: <GPIO bus> on gpio7
- gpio8: <Rockchip RK30XX GPIO controller> mem 0xff7f0000-0xff7f00ff irq 121 on simplebus0
- gpioc8: <GPIO controller> on gpio8
- gpiobus8: <GPIO bus> on gpio8
- dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0xff580000-0xff5bffff irq 55 on simplebus0
- usbus0 on dwcotg0
- dwcotg1: <DWC OTG 2.0 integrated USB controller> mem 0xff540000-0xff57ffff irq 57 on simplebus0
- usbus1 on dwcotg1
- uart0: <16750 or compatible> mem 0xff690000-0xff6903ff irq 89 on simplebus0
- uart0: console (115200,n,8,1)
- Timecounters tick every 10.000 msec
- usbus0: 480Mbps High Speed USB v2.0
- usbus1: 480Mbps High Speed USB v2.0
- random: unblocking device.
- WARNING: WITNESS option enabled, expect reduced performance.
- WARNING: DIAGNOSTIC option enabled, expect reduced performance.
- ugen0.1: <DWCOTG> at usbus0
- uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- ugen1.1: <DWCOTG> at usbus1
- uhub1: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- uhub1: 1 port with 1 removable, self powered
- uhub0: 1 port with 1 removable, self powered
- usb_alloc_device: setting up USB template failed maybe the USB template module has not been loaded
- ugen0.2: <Unknown> at usbus0 (disconnected)
- uhub_reattach_port: could not allocate new device
- ugen1.2: <vendor 0x1a40> at usbus1
- uhub2: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 2> on usbus1
- uhub2: MTT enabled
- Root mount waiting for: usbus1
- uhub2: 4 ports with 4 removable, self powered
- Root mount waiting for: usbus1
- Root mount waiting for: usbus1
- ugen1.3: <USB 2.0> at usbus1
- umass0: <USB 2.0 Flash Disk, class 0/0, rev 2.00/1.00, addr 3> on usbus1
- umass0: SCSI over Bulk-Only; quirks = 0x4100
- umass0:0:0: Attached to scbus0
- da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
- da0: <USB 2.0 Flash Disk 5.00> Removable Direct Access SCSI-2 device
- da0: Serial Number 15213301BF1BC700
- da0: 40.000MB/s transfers
- da0: 3998MB (8187904 512 byte sectors: 255H 63S/T 509C)
- da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
- Trying to mount root from ufs:/dev/da0 []...
- warning: no time-of-day clock registered, system time will not be set accurately
- Setting hostuuid: 249385b8-be3d-11e3-a644-678d5837e307.
- Setting hostid: 0xd8d50f9f.
- No suitable dump device was found.
- Entropy harvesting:sysctl: unknown oid 'kern.random.sys.harvest.interrupt': No such file or directory
- interruptssysctl: unknown oid 'kern.random.sys.harvest.ethernet': No such file or directory
- ethernetsysctl: unknown oid 'kern.random.sys.harvest.point_to_point': No such file or directory
- point_to_pointsysctl: unknown oid 'kern.random.sys.harvest.swi': No such file or directory
- swi.
- Starting file system checks:
- /dev/da0: FILE SYSTEM CLEAN; SKIPPING CHECKS
- /dev/da0: clean, 572815 free (3335 frags, 71185 blocks, 0.3% fragmentation)
- Mounting local file systems:.
- Writing entropy file:usb_alloc_device: setting up USB template failed maybe the USB template module has not been loaded
- ugen0.2: <Unknown> at usbus0 (disconnected)
- uhub_reattach_port: could not allocate new device
- .
- Setting hostname: arm.
- Starting Network: lo0.
- lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
- options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
- inet6 ::1 prefixlen 128
- inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
- inet 127.0.0.1 netmask 0xff000000
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- Starting devd.
- Starting pflogd:
- add net fe80::: gateway ::1
- add net ff02::: gateway ::1
- add net ::ffff:0.0.0.0: gateway ::1
- add net ::0.0.0.0: gateway ::1
- Creating and/or trimming log files.
- Starting syslogd.
- ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
- Starting casperd.
- Clearing /tmp (X related).
- usb_alloc_device: setting up USB template failed maybe the USB template module has not been loaded
- ugen0.2: <Unknown> at usbus0 (disconnected)
- uhub_reattach_port: could not allocate new device
- Updating motd:.
- Mounting late file systems:.
- Performing sanity check on sshd configuration.
- Starting sshd.
- Starting sendmail_submit.
- Starting sendmail_msp_queue.
- Starting cron.
- Jan 12 13:13:14 arm sm-mta[535]: s940mWXg007341: SYSERR(root): hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or directory
- usb_alloc_device: setting up USB template failed maybe the USB template module has not been loaded
- ugen0.2: <Unknown> at usbus0 (disconnected)
- uhub_reattach_port: could not allocate new device
- Starting background file system checks in 60 seconds.
- Mon Jan 12 13:13:21 ULAT 2015
- FreeBSD/arm (arm) (ttyu0)
- login: root
- Jan 12 13:13:25 arm login: ROOT LOGIN (root) ON ttyu0
- Last login: Wed Oct 1 18:39:36 on ttyu0
- FreeBSD 11.0-CURRENT (FIREFLY) #159 r276691M: Mon Jan 12 12:51:13 ULAT 2015
- Welcome to FreeBSD!
- Before seeking technical support, please use the following resources:
- o Security advisories and updated errata information for all releases are
- at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
- for your release first as it's updated frequently.
- o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
- along with the mailing lists, can be searched by going to
- http://www.FreeBSD.org/search/. If the doc package has been installed
- (or fetched via pkg install lang-freebsd-doc, where lang is the
- 2-letter language code, e.g. en), they are also available formatted
- in /usr/local/share/doc/freebsd.
- If you still have a question or problem, please take the output of
- `uname -a', along with any relevant error messages, and email it
- as a question to the questions@FreeBSD.org mailing list. If you are
- unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
- manual page. If you are not familiar with manual pages, type `man man'.
- Edit /etc/motd to change this login announcement.
- You have new mail.
- usb_alloc_device: setting up USB template failed maybe the USB template module has not been loaded
- ugen0.2: <Unknown> at usbus0 (disconnected)
- uhub_reattach_port: could not allocate new device
- root@arm:~ # uname -an
- FreeBSD arm 11.0-CURRENT FreeBSD 11.0-CURRENT #159 r276691M: Mon Jan 12 12:51:13 ULAT 2015 tsgan@beastie.micom.mng.net:/usr/obj/arm.armv6/usr/src/sys/FIREFLY arm
- root@arm:~ # id
- uid=0(root) gid=0(wheel) groups=0(wheel),5(operator)
- root@arm:~ #
|
|
