Firefly Open Source Community

   Login   |   Register   |
New_Topic
Print Previous Topic Next Topic

[Hardware] 156-836Y & 156-836JC

89

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
89

Hardware 156-836Y & 156-836JC

Posted at 2/8/2026 05:18:31      View227 | Replies0        Print      Only Author   [Copy Link] 1#
P.S. NewDumpsGoogle DriveϷM2026 CheckPoint 156-836ԇ}죺https://drive.google.com/open?id=1EFnvPBcNMkeJM_XQsm2x5zcf8DcOHrgB
]˳⣬҂NewDumpsC100%ı xNewDumpsxҪ_ʼӖKͨ^һεĿ}㌢õõYԴcЈPԺͿɿԱCNewDumps CheckPoint156-836}ʹ𰸷ӳĆ}156-836ԇ
156-836}CЧģͨ^ܶITJCԇĿʹ֮óʹڶ̕rgµCheckPoint 156-836ԇP֪Rɸ߼JCҲƳ°156-836}YϣоY100%Cɹͨ^156-836ԇ@JC@ǷdzЧ}YϡһЩͨ^156-836ԇĿɞ҂Ļ^ͣfxNewDumpsζxɹ
]156-836YϣMd156-836ԇYώͨ^156-836ԇܶ˶JҪͨ^һЩyȵ156-836JCԇҪͨܶCheckPointI֪RֻպȫICheckPoint֪R˲ŕYȥӵĿԇ䌍Fкܶ෽Ԏ㏛a֪Rģһͨ^156-836JCԇҲSЩI֪Rஔȫ˻ĕrg;٣^ll·ͨ_R
µ CCME 156-836 Mԇ} (Q64-Q69):} #64
How many orchestrators may Dual-Site include?
  • A. 0
  • B. Only 4
  • C. 1
  • D. 2 or 4
𰸣D
}f
Explanation
A Dual Site environment can include either two or four orchestrators, depending on the scenario. There are three primary scenarios for Dual Site configuration:
*Direct connectivity between remote site orchestrators: This scenario requires two orchestrators, one for each site, and a direct connection between them using the site-sync port.
*Two orchestrators on the same site are connected to the remote site orchestrators through two different switches: This scenario requires four orchestrators, two for each site, and a connection between them using the site-sync port and two external switches that support QinQ and MTU increment.
*Two orchestrators on the same site are connected to the remote site orchestrators through one switch: This scenario also requires four orchestrators, two for each site, and a connection between them using the site-sync port and one external switch that supports QinQ and MTU increment.
References =
*Maestro Dual Site configuration with a direct connection through L2 switches
*Dual Site Single Maestro Hyperscale Orchestrator Cluster (Dual Site Single MHO Redundancy)
*Maestro Frequently Asked Questions (FAQ)

} #65
How does HyperSync work in a Dual Site environment?
  • A. Each active connection has a local backup (on the local site) and a second backup connection on the second site (remote site.)
  • B. Each active connection has a local backup (on the local site) and a second backup connection on each of the MHOs.
  • C. Each active connection has two local backups (on the local site) and a third backup connection on the second site (remote site.)
  • D. Each active connection has a backup connection on the second site (remote site.)
𰸣A

} #66
How many orchestrators may Dual-Site include?
  • A. 0
  • B. Only 4
  • C. 1
  • D. 2 or 4
𰸣D
}f
A Dual Site environment can include either two or four orchestrators, depending on the scenario. There are three primary scenarios for Dual Site configuration:
*Direct connectivity between remote site orchestrators: This scenario requires two orchestrators, one for each site, and a direct connection between them using the site-sync port.
*Two orchestrators on the same site are connected to the remote site orchestrators through two different switches: This scenario requires four orchestrators, two for each site, and a connection between them using the site-sync port and two external switches that support QinQ and MTU increment.
*Two orchestrators on the same site are connected to the remote site orchestrators through one switch: This scenario also requires four orchestrators, two for each site, and a connection between them using the site-sync port and one external switch that supports QinQ and MTU increment.
References =
*Maestro Dual Site configuration with a direct connection through L2 switches
*Dual Site Single Maestro Hyperscale Orchestrator Cluster (Dual Site Single MHO Redundancy)
*Maestro Frequently Asked Questions (FAQ)

} #67
What kinds of transceivers are supported on Orchestrator MHO-170?
  • A. SFP+, SFP28, QSFP
  • B. SFP, QSFP, QSFP28
  • C. SFP, SFP+, SFP28
  • D. QSFP, QSFP28
𰸣D
}f
The Orchestrator MHO-170 supports QSFP and QSFP28 transceivers on its 32x 100 GbE ports. QSFP stands for Quad Small Form-factor Pluggable and QSFP28 is an enhanced version of QSFP that supports up to 28 Gbps per lane. These transceivers can provide high-speed and high-density connectivity for the Maestro environment.
References
*Maestro Hyperscale Orchestrator Datasheet - Check Point Software1, page 2
*Maestro Transceiver & DAC Inventory - Check Point CheckMates

} #68
Multiple SGs can exist in a Dual Site environment. Each SG can be configured in one of three ways. Which is not one of those ways?
  • A. Two MHOs connected to two MHOs via load balancers.
  • B. Two MHOs at same site connected to remote site MHOs via single switch.
  • C. Direct connectivity between Remote Site MHOs.2
  • D. Two MHOs at same site connected to remote site MHOs via two different switches.
𰸣A
}f
This is not one of the ways to configure a Security Group in a Dual Site environment, because load balancers are not required or supported for the inter-site communication between the Maestro Orchestrators (MHOs).
The MHOs use the Site-Sync port and VLANs to synchronize the resources and connections across the sites.
The three valid scenarios for Dual Site configuration are:
*Direct connectivity between remote site Orchestrators: This scenario requires two orchestrators, one for each site, and a direct connection between them using the site-sync port.
*Two orchestrators on the same site are connected to the remote site orchestrators through two different switches: This scenario requires four orchestrators, two for each site, and a connection between them using the site-sync port and two external switches that support QinQ and MTU increment.
*Two orchestrators on the same site are connected to the remote site orchestrators through one switch: This scenario also requires four orchestrators, two for each site, and a connection between them using the site-sync port and one external switch that support QinQ and MTU increment.
References =
*Maestro Dual Site configuration with a direct connection through L2 switches
*[Dual Site Single Maestro Hyperscale Orchestrator Cluster (Dual Site Single MHO Redundancy)]
*[Maestro Frequently Asked Questions (FAQ)]

} #69
......
CheckPoint156-836JCԇǬFITIdz˚Ŀԇȡ@ԇJCYx˂fõģҲԿЧx񡣶ң@ԇҲԼļܣոČõļg@ͿԸõĹeչʾijҲֻſԻøķչᡣ
156-836JC: https://www.newdumpspdf.com/156-836-exam-new-dumps.html
ֵهIJЧ 156-836 }YϣCheckPoint 156-836Y һЧʵĿ}ǴҜʂ俼ԇrزٵĹߣCheckPoint 156-836Y \FȭҪĕrֻд´ǵ˲܉̩֮̎Ȼ156-836 forum ߀156-836 WȦӃȽ҂ĝReҪԽˣCheckPoint 156-836Y Ҫͨ^ԇǺyģՈҪģCheckPoint 156-836JCJCԇITIҪĿԇ֮һ@CheckPoint 156-836 JCJCYNͿԵõܴĎCheckPoint 156-836Y ҵģ۹ȥôʧ֣ӵС
ֹoǃɂʿUٝͬǵǣֵهIJЧ 156-836 }YϣһЧʵĿ}ǴҜʂ俼ԇrزٵĹߣ\FȭҪĕrֻд´ǵ˲܉̩֮̎Ȼ
156-836YϣCheck Point Certified Maestro Expert - R81 (CCME)ԇͨ^C156-836 forum ߀156-836 WȦӃȽ҂ĝReҪԽˣҪͨ^ԇǺyģՈҪġ
2026 NewDumpsµ156-836 PDF濼ԇ}156-836ԇ}ʹMhttps://drive.google.com/open?id=1EFnvPBcNMkeJM_XQsm2x5zcf8DcOHrgB
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list