Firefly Open Source Community

   Login   |   Register   |
New_Topic
Print Previous Topic Next Topic

[Linux] update.img cannot boot my board

19

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
19

【Linux】 update.img cannot boot my board

Posted at 11/3/2021 17:36:36      View:1666 | Replies:1        Print      Only Author   [Copy Link] 1#
Hi, recently I bought AIO-3399ProJD4 and as per this document (https://wiki.t-firefly.com/en/AI ... ux_compile_gpt.html) I made an image file for Ubuntu OS.
On my linux host pc, flashing image to the board failed for the reason that I couldn't find out.
So I tried flashing the board with Windows10 host PC and it was succeeded.
But when I tried to boot the board, the connected HDMI monitor showed nothing.
I cannot sure I made my image file properly.
It is very apreciated if someone provide ready-to-flash image file for my AIO-3399ProJD4 board. I'm struggling with this board for 1 week already...
Thank you, thank you.
Reply

Use props Report

792

Credits

10

Prestige

10

Contribution

advanced

Rank: 4

Credits
792
Posted at 11/19/2021 16:13:31        Only Author  2#
Pls make sure firmware complete and flash in the board.
https://wiki.t-firefly.com/en/AI ... grade_firmware.html

Updating the source code before building the update.img is better.
https://wiki.t-firefly.com/en/AI ... e-firefly-linux-sdk
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list