Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Core Board › Core-PX3-SEJ› Reliable CWNA-109 Test Topics, Exam CWNA-109 Cost
New Topic
Print Previous Topic Next Topic

[General] Reliable CWNA-109 Test Topics, Exam CWNA-109 Cost

charlot286

127

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
127

【General】 Reliable CWNA-109 Test Topics, Exam CWNA-109 Cost

Posted at 1/11/2026 12:22:19      View：28 | Replies：1        Print      Only Author   [Copy Link] 1#
P.S. Free 2026 CWNP CWNA-109 dumps are available on Google Drive shared by TestsDumps: https://drive.google.com/open?id=1CnrQsX0aoAqehWCoemEXiPbxrBrZ-Ipu
The CWNP Wireless Network Administrator (CWNA) (CWNA-109) questions are in use by many customers currently, and they are preparing for their best future daily. Even the students who used it in the past to prepare for the CWNP Certification Exam have rated our practice questions as one of the best. You will receive updates till 365 days after your purchase, and there is a 24/7 support system that assists you whenever you are stuck in any problem or issues.
Up to now, there are three versions of CWNA-109 exam materials for your choice. So high-quality contents and flexible choices of CWNA-109 learning mode will bring about the excellent learning experience for you. Though the content of these three versions of our CWNA-109 study questions is the same, their displays are totally different. And you can be surprised to find that our CWNA-109 learning quiz is developed with the latest technologies as well.
Top Reliable CWNA-109 Test Topics Help You Clear Your CWNP CWNA-109: CWNP Wireless Network Administrator (CWNA) Exam CertainlyThis is a mutually beneficial learning platform, that's why our CWNA-109 study materials put the goals that each user has to achieve on top of us, our loyal hope that users will be able to get the test CWNA-109 certification, make them successful, and avoid any type of unnecessary loss and effortless harvesting that belongs to their success. Respect the user's choice, will not impose the user must purchase the CWNA-109 Study Materials. We can meet all the requirements of the user as much as possible, to help users better pass the qualifying exams.
CWNP CWNA-109 Exam Syllabus Topics:
TopicDetails
Topic 1
  • WLAN Regulations and Standards: The topic discusses the roles of WLAN and networking industry organizations. It also addresses the concepts of various Physical Layer (PHY) solutions, spread spectrum technologies, and 802.11 WLAN functional concepts.
Topic 2
  • RF Validation and WLAN remediation: This topic covers RF interference, WLAN performance, the basic features of validation tools, and common wireless issues.
Topic 3
  • WLAN Network Security: It addresses the concepts of weak security options, security mechanisms for enterprise WLANs, and security options and tools used in wireless networks.

CWNP Wireless Network Administrator (CWNA) Sample Questions (Q86-Q91):NEW QUESTION # 86
What is always required to establish a high quality 2.4 GHz RF link at a distance of 3 miles (5 kilometers)?
  • A. Minimum output power level of 2 W
  • B. Grid antennas ateach endpoint
  • C. A minimum antenna gain of 11 dBi at both endpoints
  • D. A Fresnel Zone that is at least 60% clear of obstructions
Answer: D
Explanation:
What is always required to establish a high quality 2.4 GHz RF link at a distance of 3 miles (5 kilometers) is a Fresnel Zone that is at least 60% clear of obstructions. The Fresnel Zone is an elliptical-shaped area around the line-of-sight path between two antennas that reflects and refracts the RF waves. The Fresnel Zone radius depends on the frequency of the RF signal and the distance between the antennas. For optimal performance, the Fresnel Zone should be at least 60% clear of any obstructions that may cause interference, attenuation, or multipath fading. The minimum output power level, antenna gain, and antenna type may vary depending on the environmental conditions and regulatory constraints, but they are not always required for a high quality RF link. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 75; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page
65.

NEW QUESTION # 87
Your consulting firm has recently been hired to complete a site survey for a company desiring an indoor coverage WI-AN. Your engineers use predictive design software for the task, but the company insists on a pre-design site visit.
What task should be performed as part of the pre-design visit to prepare for a predictive design?
  • A. Install at least one AP on each side of the exterior walls to test for co-channel interference through these walls
  • B. Collect information about the company's security requirements and the current configuration of their RADIUS and user database servers
  • C. Test several antenna types connected to the intended APS for use in the eventual deployment
  • D. Evaluate the building materials at the facility and confirm that the floor plan documents are consistent with the actual building
Answer: D
Explanation:
A pre-design site visit in preparation for a predictive wireless LAN design is essential for gathering physical and environmental data about the site. The key tasks to be performed during such a visit include:
* Evaluating Building Materials: Different materials (concrete, glass, wood, etc.) have varying effects on RF signal propagation. Understanding the materials present helps in accurately predicting how signals will behave within the environment.
* Floor Plan Verification: Ensuring that the floor plan documents are an accurate representation of the actual building layout is crucial. Discrepancies between the floor plans and the physical layout can lead to inaccuracies in the predictive design.
The other options, while potentially valuable in other contexts, are not directly related to preparing for a predictive design:
* Installing APs(option A) for testing co-channel interference is more aligned with an active site survey rather than a pre-design visit for a predictive design.
* Collecting information about security requirements(option B) is important but is not directly related to the physical aspects of the site that would impact a predictive design.
* Testing antenna types(option C) would typically be part of an active site survey or the actual deployment phase, not a pre-design visit for predictive modeling.
Therefore, option D is the correct answer, focusing on evaluating physical aspects crucial for accurate predictive modeling.
References:
* CWNA Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109, by David D: Coleman and David A. Westcott.
* Best practices for conducting pre-design site visits in wireless network planning.

NEW QUESTION # 88
What is the most effective method for testing roaming in relation to 802.11 VoIP handsets?
  • A. Use a spectrum analyzer to monitor RF activity during a VoIP call.
  • B. Use a protocol analyzer to capture the traffic generated when a laptop roams.
  • C. Use the built-in roaming monitor built into all VoIP handsets.
  • D. Place a call with the handset and move around the facility to test quality during roaming.
Answer: D
Explanation:
The most effective method for testing roaming in relation to 802.11 VoIP handsets is to place a call with the handset and move around the facility to test quality duringroaming. This method allows you to evaluate the actual performance and user experience of VoIP calls over wireless networks, as well as identify any potential issues such as signal strength, interference, latency, jitter, packet loss, or handoff delays. A spectrum analyzer can only show you the RF activity during a VoIP call, but not how it affects the voice quality or roaming behavior. A protocol analyzer can capture the traffic generated when a laptop roams, but it cannot simulate the characteristics of a VoIP handset such as battery life, antenna design, codec support, or QoS features. A built-in roaming monitor is not a common feature in all VoIP handsets, and it may not provide accurate or comprehensive information about the roaming process. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 487; [Voice over Wireless LAN 4.1 Design Guide], page 6-19.

NEW QUESTION # 89
Three access points are used within a facility. One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. Assuming no other APs are in the vicinity, is CCI still a possibility in this network and why?
  • A. Yes, because channel 11 loops around and causes CCI with channel 1.
  • B. No, because the APs are far enough apart that no CCI will occur.
  • C. Yes, because the client devices connected to one of the channel 1 APs will transmit frames that reach the other channel 1 AP as well as clients connected to the other channel 1 AP.
  • D. No, because CCI only occurs in the 5 GHz frequency band.
Answer: C
Explanation:
CCI is still a possibility in this network because the client devices connected to one of the channel 1 APs will transmit frames that reach the other channel 1 AP as well as clients connected to the other channel 1 AP. CCI stands for co-channel interference, which is a type of interference that occurs when two or more devices transmit on the same channel within range of each other. CCI reduces performance and capacity because it causes contention and collisions on the wireless medium, which leads to retransmissions and delays. CCI can be mitigated by increasing physical separation between devices using the same channel or by reducing transmit power levels to limit coverage area. In this scenario, three access points are used within a facility.
One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. However, this does not prevent CCI from occurring between their client devices that are connected on channel 1. For example, if a client device connected to one of the channel
1 APs sends a frame to another device on the wired network or on another wireless network (such as an Internet server or a VoIP phone), that frame will be heard by both channel 1 APs as well as any other client devices connected to either of them on channel 1. This will cause CCI because these devices will have to wait for the channel to be clear before they can transmit their own frames. The answer that CCI only occurs in the
5 GHz frequency band is incorrect; CCI can occur in any frequency band where devices use the same channel.
The answer that channel 11 loops around and causes CCI with channel 1 is also incorrect; channel 11 does not loop around and it operates in a different frequency band than channel 1. References: CWNA-109 Study Guide, Chapter 5: Radio Frequency Signal and Antenna Concepts, page 147

NEW QUESTION # 90
You manage a WLAN with 100 802.11ac access points. All access points are configured to use 80 MHz channels. In a particular BSS, only 40 MHz communications are seen. What is the likely cause of this behavior?
  • A. The AP is improperly configured to use only 40 MHz of the 80 MHz allocated bandwidth
  • B. The short guard interval is also enabled
  • C. The clients are all 802.11n STAs or lower
  • D. All clients implement single spatial stream radios
Answer: C
Explanation:
https://7signal.com/802-11ac-mig ... and-160mhz-channel- bonding The clients are all 802.11n STAs or lower is the likely cause of this behavior. If a WLAN with 100 802.11ac access points is configured to use 80 MHz channels, but only 40 MHz communications are seen in a particular BSS, it means that the clients in that BSS do not support 80 MHz channels. This could be because they are using older standards, such as 802.11n or lower, that do not support 80 MHz channels. Alternatively, they could be using newer standards, such as 802.11ac or ax, but have their channel width settings limited to 40 MHz or lower due to device capabilities or configuration options. In either case, the AP will adapt to the client's channel width and use only 40 MHz of the 80 MHz allocated bandwidth to communicate with them.
This will reduce the potential throughput and efficiency of the WLAN. References: , Chapter 3, page 111; , Section 3.2

NEW QUESTION # 91
......
TestsDumps has designed CWNP Wireless Network Administrator (CWNA) which has actual exam Dumps questions, especially for the students who are willing to pass the CWNP CWNA-109 exam for the betterment of their future. The study material is available in three different formats. CWNP Practice Exam are also available so the students can test their preparation with unlimited tries and pass CWNP Wireless Network Administrator (CWNA) (CWNA-109) certification exam on the first try.
Exam CWNA-109 Cost: https://www.testsdumps.com/CWNA-109_real-exam-dumps.html
BTW, DOWNLOAD part of TestsDumps CWNA-109 dumps from Cloud Storage: https://drive.google.com/open?id=1CnrQsX0aoAqehWCoemEXiPbxrBrZ-Ipu
https://www.pruefungfrage.de
Reply

Use props Report

scottda901

134

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
134
Posted at 8 hour before        Only Author  2#
EC-COUNCIL업계에 종사하시는 분들은 312-50인증시험을 통한 자격증취득의 중요성을 알고 계실것입니다. Fast2test에서 제공해드리는 인증시험대비 고품질 덤프자료는 제일 착한 가격으로 여러분께 다가갑니다. Fast2test덤프는 312-50인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.덤프를 구입하시면 일년무료 업데이트서비스, 시험불합격시 덤프비용환불 등 퍼펙트한 서비스도 받을수 있습니다.
https://www.braindumpstudy.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list