Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Core Board › Core-PX30-JD4› HPE7-A03 Exam Torrent & HPE7-A03 Real Questions ...
New Topic
Print Previous Topic Next Topic

[General] HPE7-A03 Exam Torrent & HPE7-A03 Real Questions & HPE7-A03 Exam Cram

chriswe844

133

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
133

【General】 HPE7-A03 Exam Torrent & HPE7-A03 Real Questions & HPE7-A03 Exam Cram

Posted at yesterday 19:05      View：6 | Replies：0        Print      Only Author   [Copy Link] 1#
BTW, DOWNLOAD part of Braindumpsqa HPE7-A03 dumps from Cloud Storage: https://drive.google.com/open?id=1g9Ny4XLiWd871o4HZ8I791DMCMzQOk8v
The Aruba Certified Campus Access Architect Exam HPE7-A03 exam questions are the real HPE7-A03 Exam Questions that will surely repeat in the upcoming HPE7-A03 exam and you can easily pass the challenging Aruba Certified Campus Access Architect Exam HPE7-A03 certification exam. The HPE7-A03 dumps are designed and verified by experienced and qualified Aruba Certified Campus Access Architect Exam HPE7-A03 certification exam trainers. They strive hard and utilize all their expertise to make sure the top standard of HPE7-A03 Exam Practice test questions all the time. So you rest assured that with HPE7-A03 exam real questions you can not only ace your entire Aruba Certified Campus Access Architect Exam HPE7-A03 exam preparation process but also feel confident to pass the Aruba Certified Campus Access Architect Exam HPE7-A03 exam easily.
HP HPE7-A03 Exam Syllabus Topics:
TopicDetails
Topic 1
  • Discover Requirements: This topic defines the goals and identifies the current environment and the objectives. Lastly, it also focuses on collecting information.
Topic 2
  • Propose the Solution: The focal point of this topic is creating the design documentation and the final design. Moreover, the topic also focuses on presenting the solution.
Topic 3
  • Analyze Requirements: It focuses on determining possible high-level solutions. The topic also discusses mapping the needs into technical solutions and evaluating the proposed solution against project objectives and dependencies. Moreover, it also focuses on documenting assumptions.
Topic 4
  • Architect the Solution: It measures your knowledge about identifying the solution options, designing high-level topologies, selecting the correct products, and determining the suitable overlay and underlay design. Additionally, the topic discusses how to verify that the design meets the original requirements.

Practice Test HPE7-A03 Fee - HPE7-A03 Valid Guide FilesBraindumpsqa offers affordable Aruba Certified Campus Access Architect Exam exam preparation material. You don't have to go beyond your budget to buy Updated HPE7-A03 Dumps. To make your HPE7-A03 exam preparation material smooth, a bundle pack is also available that includes all the 3 formats of dumps questions. Braindumpsqa offers 365 days updates.
HP Aruba Certified Campus Access Architect Exam Sample Questions (Q59-Q64):NEW QUESTION # 59
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has asmall help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
What should the architect be concerned about regarding the solution? (Select two.)
  • A. multiple locations
  • B. Active Directory
  • C. Regulatory Domains
  • D. IP addresses
Answer: A,C
Explanation:
In designing a network solution for ACME Retail, which operates across various regions in the US and Canada, the architect must consider Regulatory Domains and the challenges posed by multiple locations.
Regulatory Domains are crucial because wireless standards and allowed frequencies vary by country, affecting how WLAN equipment is configured and deployed. Compliance with local regulations is essential to avoid legal issues and ensure optimal network performance. The challenge of multiple locations involves ensuring consistent, high-quality network service across all sites, despite geographical distances and site-specific characteristics. This requires a scalable, flexible network architecture that can be centrally managed while accommodating the unique needs of each location.

NEW QUESTION # 60
A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10 GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new Internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because the Internet connection is guaranteed.
Based on best practices, what should you recommend as the correct optic type for the connection between the IDF and the cabins?
  • A. 10G LC BiDi 40 km 1330/1270 XCVR
  • B. 10GBASE-T SFP+ RJ-45 30 m Cat6A Transceiver
  • C. 10G SFP+ LC LRM 220 m MMF Transceiver
  • D. 10G SFP+ LC SR 300 m MMF Transceiver
Answer: D
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
* Cabling Type in Use:Each cabin and technical room is connected to the IDF with a single OM2 multimode fiber pair. The maximum length to cabins is 60 meters, and to technical rooms 100-150 meters.
* Best Practice for 10 GbE over OM2:According to Aruba's Campus Access Design Guides and HPE Aruba CX switch transceiver support matrices:
* OM2 multimode fiber supports 10GBASE-SR optics up to 82 meters.
* Since the maximum run is 60 meters, 10GBASE-SR is fully supported with headroom.
* 10GBASE-LRM can reach 220 m on MMF, but is not required here because the fiber length is much shorter. SR optics are simpler, lower cost, and recommended in best practices when distances are within OM2 limits.
* 10GBASE-T RJ-45 (Cat6A) is not applicable, as the cabling is fiber, not copper.
* BiDi 40 km optics are for long-haul single-mode fiber links, not short multimode fiber runs.
* Aruba Validated Design Reference:Aruba's Validated Solution Guides for Campus Access state that for short multimode connections (OM2/OM3/OM4), the recommended transceiver type is
10GBASE-SR (SFP+ LC) as it provides the most cost-effective and reliable option within the supported reach.
* Requirement Mapping:
* Uplinks to access switches in cabins/technical rooms must be 10 GbE capable.
* The OM2 cabling length (60-150 m) is within the supported distance for 10GBASE-SR.
* Therefore, the correct and most efficient optic choice is 10G SFP+ LC SR 300 m MMF Transceiver.
Final Justification:
Option B is correct because 10GBASE-SR over OM2 supports the required distances, aligns with Aruba design best practices, and avoids unnecessary cost/complexity of LRM or BiDi optics.
Reference Extracts (Aruba Official Study & Design Guides):
* Aruba Campus Access Design Guide: recommended transceiver selection for MMF cabling.
* Aruba CX Transceiver Guide: 10GBASE-SR supports OM2 up to 82 m, OM3 up to 300 m, OM4 up to
400 m.
* Aruba Validated Solution Guide: Always select SR optics for OM2 # 82 m runs as the cost-effective standard.

NEW QUESTION # 61
Based on this campus design, click on the layer that is the most appropriate to be designed as a Stub Persona, considering an EVPN VXLAN Fabric?

Answer:
Explanation:

Explanation:
In an EVPN VXLAN Fabric, the most appropriate layer to be designed as a Stub Persona, which typically refers to the edge or endpoint of a network with simplified routing and forwarding, would be the "Access" layer. This is where endpoints, such as user devices, connect to the network, and it's where you would typically implement simplified network protocols that do not require full routing information.
The Access layer is the entry point for endpoints into the network fabric, and it benefits from EVPN VXLAN by segmenting traffic and providing layer 2 connectivity over a layer 3 fabric without the need for complex routing protocols. The stub would not need the full capabilities of the core or aggregation layers, making the Access layer the ideal candidate.

NEW QUESTION # 62
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like 10 include Blue Dot wayfinding for their carpeted office space. The retail floors are not currently in scope What would be needed to ensure proper licensing of the solution?
  • A. Qtyl Meridian Tracking subscription
    Qty 1 Meridian Blue Dot subscription
  • B. Qty 4 Meridian Blue Dot subscriptions
  • C. Qty 4 Meridian Map subscriptions
    Qty 4 Meridian Blue Dot subscriptions
  • D. Qty 1 Meridian Blue Dot subscription
Answer: D
Explanation:
For implementing Blue Dot wayfinding in the carpeted office space of the multinational financial institution, a Meridian Blue Dot subscription is essential. Meridian's Blue Dot wayfinding technology allows for real-time indoor navigation, which can enhance the experience of employees and visitors by providing turn-by-turn directions within the office space. Given that the requirement is specifically for the carpeted office space and not for the retail floors, a single Meridian Blue Dot subscription would be the starting point to enable this functionality. This subscription would cover the deployment of the Blue Dot technology across the specified office floors, allowing for the integration of this feature into the institution's app or digital platform for indoor navigation. Additional subscriptions, such as Meridian Map subscriptions, might be required for more extensive mapping needs, but based on the provided options and the specific request for Blue Dot functionality, a single Blue Dot subscription would be the most direct answer.

NEW QUESTION # 63
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client decides that they would like for all of their exposed printer, conference room, and VoIP phone connections to be controlled by a stateful firewall What could be planned to ensure that these ports will meet the customer's requirements?
  • A. Web Portal
  • B. Multi-Zone
  • C. Airgroup
  • D. Tunneled Node
Answer: D
Explanation:
To control exposed printer, conference room, and VoIP phone connections with a stateful firewall, utilizing Tunneled Node functionality would be effective. Tunneled Node allows for the encapsulation of wired Ethernet traffic into a user-based tunnel, similar to how wireless traffic is handled. This means that traffic from these devices can be sent through a centralized controller where stateful firewall policies can be applied. This setup ensures that the specific ports used by these devices are subjected to the same level of security scrutiny and policy enforcement as wireless traffic, aligning with the client's requirements for a secure and controlled network environment.

NEW QUESTION # 64
......
Braindumpsqa cares for your queries also, there is a competition going on in market who is offering HPE7-A03 Study Material, but to remove all the ambiguities, Braindumpsqa offers you to try a free demo of actual HPE7-A03 exam questions. The free demo will give you a clear image of what exactly Braindumpsqa offers you. You may buy the product if you are satisfied with the demo. Braindumpsqa also offers you a best feature of free updates. We update the product on a consistent basis. We own a dedicated team of experts in standby, who make the necessary changes in the material, as and when required.
Practice Test HPE7-A03 Fee: https://www.braindumpsqa.com/HPE7-A03_braindumps.html
P.S. Free & New HPE7-A03 dumps are available on Google Drive shared by Braindumpsqa: https://drive.google.com/open?id=1g9Ny4XLiWd871o4HZ8I791DMCMzQOk8v
https://www.vce4dumps.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list