Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Board › ROC-RK3328-CC› CWNP CWSP-208 Valid Braindumps Free - Exam CWSP-208 ...
New Topic
Print Previous Topic Next Topic

[General] CWNP CWSP-208 Valid Braindumps Free - Exam CWSP-208 Online

maxtate806

133

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
133

【General】 CWNP CWSP-208 Valid Braindumps Free - Exam CWSP-208 Online

Posted at 9 hour before      View：3 | Replies：0        Print      Only Author   [Copy Link] 1#
BONUS!!! Download part of TestPassKing CWSP-208 dumps for free: https://drive.google.com/open?id=1cKP_T08lxuzf81cMV2tOGgw72vwUyWtf
TestPassKing has built customizable CWNP CWSP-208 practice exams (desktop software & web-based) for our customers. Users can customize the time and Certified Wireless Security Professional (CWSP) (CWSP-208) questions of CWNP CWSP-208 Practice Tests according to their needs. You can give more than one test and track the progress of your previous attempts to improve your marks on the next try.
CWNP CWSP-208 Exam Syllabus Topics:
TopicDetails
Topic 1
  • WLAN Security Design and Architecture: This part of the exam focuses on the abilities of a Wireless Security Analyst in selecting and deploying appropriate WLAN security solutions in line with established policies. It includes implementing authentication mechanisms like WPA2, WPA3, 802.1X
  • EAP, and guest access strategies, as well as choosing the right encryption methods, such as AES or VPNs. The section further assesses knowledge of wireless monitoring systems, understanding of AKM processes, and the ability to set up wired security systems like VLANs, firewalls, and ACLs to support wireless infrastructures. Candidates are also tested on their ability to manage secure client onboarding, configure NAC, and implement roaming technologies such as 802.11r. The domain finishes by evaluating practices for protecting public networks, avoiding common configuration errors, and mitigating risks tied to weak security protocols.
Topic 2
  • Security Lifecycle Management: This section of the exam assesses the performance of a Network Infrastructure Engineer in overseeing the full security lifecycle—from identifying new technologies to ongoing monitoring and auditing. It examines the ability to assess risks associated with new WLAN implementations, apply suitable protections, and perform compliance checks using tools like SIEM. Candidates must also demonstrate effective change management, maintenance strategies, and the use of audit tools to detect vulnerabilities and generate insightful security reports. The evaluation includes tasks such as conducting user interviews, reviewing access controls, performing scans, and reporting findings in alignment with organizational objectives.
Topic 3
  • Security Policy: This section of the exam measures the skills of a Wireless Security Analyst and covers how WLAN security requirements are defined and aligned with organizational needs. It emphasizes evaluating regulatory and technical policies, involving stakeholders, and reviewing infrastructure and client devices. It also assesses how well high-level security policies are written, approved, and maintained throughout their lifecycle, including training initiatives to ensure ongoing stakeholder awareness and compliance.
Topic 4
  • Vulnerabilities, Threats, and Attacks: This section of the exam evaluates a Network Infrastructure Engineer in identifying and mitigating vulnerabilities and threats within WLAN systems. Candidates are expected to use reliable information sources like CVE databases to assess risks, apply remediations, and implement quarantine protocols. The domain also focuses on detecting and responding to attacks such as eavesdropping and phishing. It includes penetration testing, log analysis, and using monitoring tools like SIEM systems or WIPS
  • WIDS. Additionally, it covers risk analysis procedures, including asset management, risk ratings, and loss calculations to support the development of informed risk management plans.

Latest CWNP CWSP-208 Dumps PDF - Quick And Proven Way To Pass ExamWe committed to providing you with the best possible Certified Wireless Security Professional (CWSP) (CWSP-208) practice test material to succeed in the CWNP CWSP-208 exam. With real CWSP-208 exam questions in PDF, customizable CWNP CWSP-208 practice exams, free demos, and 24/7 support, you can be confident that you are getting the best possible CWSP-208 Exam Material for the test. Buy today and start your journey to Certified Wireless Security Professional (CWSP) (CWSP-208) exam success with TestPassKing!
CWNP Certified Wireless Security Professional (CWSP) Sample Questions (Q119-Q124):NEW QUESTION # 119
Given: Your organization is using EAP as an authentication framework with a specific type that meets the requirements of your corporate policies.
Which one of the following statements is true related to this implementation?
  • A. The client STAs may communicate over the uncontrolled port in order to authenticate as soon as Open System authentication completes.
  • B. The client STAs must use a different, but complementary, EAP type than the AP STAs.
  • C. The client will be the authenticator in this scenario.
  • D. The client STAs may communicate over the controlled port in order to authenticate as soon as the Open System authentication completes.
Answer: A
Explanation:
Comprehensive Detailed Explanation:
In 802.1X/EAP-based authentication:
After Open System authentication, clients send EAP messages via the uncontrolled port.
The Controlled Port remains blocked until the 802.1X/EAP and 4-Way Handshake processes are complete.
Incorrect:
A). The AP or controller is the authenticator, not the client.
B). EAP types must match between supplicant and server.
D). Controlled port remains blocked until full authentication and key negotiation completes.
References:
CWSP-208 Study Guide, Chapter 4 (802.1X Controlled and Uncontrolled Port Behavior) IEEE 802.1X Framework Details

NEW QUESTION # 120
In an effort to optimize WLAN performance, ABC Company has upgraded their WLAN infrastructure from
802.11a/g to 802.11n. 802.11a/g clients are still supported and are used throughout ABC's facility. ABC has always been highly security conscious, but due to budget limitations, they have not yet updated their overlay WIPS solution to 802.11n or 802.11ac.
Given ABC's deployment strategy, what security risks would not be detected by the 802.11a/g WIPS?
  • A. 802.11a STA performing a deauthentication attack against 802.11n APs
  • B. Hijacking attack performed by using a rogue 802.11n AP against an 802.11a client
  • C. Rogue AP operating in Greenfield 40 MHz-only mode
  • D. 802.11n client spoofing the MAC address of an authorized 802.11n client
Answer: C
Explanation:
An 802.11a/g-based WIPS cannot detect rogue activity that occurs in 802.11n/ac-specific modes, including Greenfield (HT-only) operation and use of 40 MHz channels, which are not part of the 802.11a/g specification. Greenfield mode disables legacy support, so a WIPS limited to 802.11a/g radios won't even
"see" these frames. This leaves a significant blind spot for detecting certain types of rogue devices or attacks using newer PHYs.
References:
CWSP-208 Study Guide, Chapter 7 - WIPS Capabilities and Limitations
CWNP CWSP-208 Objectives: "Protocol Compatibility and Threat Detection"

NEW QUESTION # 121
What is a primary criteria for a network to qualify as a Robust Security Network (RSN)?
  • A. WPA-Personal must be supported for authentication and encryption.
  • B. Token cards must be used for authentication.
  • C. Dynamic WEP-104 encryption must be enabled.
  • D. WEP may not be used for encryption.
  • E. WLAN controllers and APs must not support SSHv1.
Answer: D
Explanation:
A Robust Security Network (RSN) is defined by the IEEE 802.11i standard and is designed to provide a framework for secure wireless LAN communications. One of the primary criteria for a network to qualify as an RSN is that WEP (Wired Equivalent Privacy) must not be used for encryption, as WEP has well-known vulnerabilities and is considered insecure. RSN-compliant networks must use either CCMP (AES) or GCMP for encryption and 802.1X/EAP or WPA2-Personal for authentication.
Incorrect:
A). Token cards are not part of RSN criteria.
B). Dynamic WEP is still WEP and disqualifies RSN status.
D). WPA-Personal may be supported, but alone does not define an RSN.
E). SSHv1 concerns device management security, not RSN qualification.
References:
CWSP-208 Study Guide, Chapter 3 (Robust Security Networks)
IEEE 802.11i Standard
CWNP Exam Objectives: Security Standards and Protocols

NEW QUESTION # 122
What drawbacks initially prevented the widespread acceptance and use of Opportunistic Key Caching (OKC)?
  • A. Because OKC is not defined by any standards or certification body, client support was delayed and sporadic early on.
  • B. Key exchanges during fast roams required processor-intensive cryptography, which was prohibitive for legacy devices supporting only TKIP.
  • C. Sharing cached keys between controllers during inter-controller roaming created vulnerabilities that exposed the keys to attackers.
  • D. The Wi-Fi Alliance continually delayed the creation of a client certification for OKC, even though it was defined by IEEE 802.11r.
Answer: A
Explanation:
Opportunistic Key Caching (OKC) is a non-standardized fast roaming method that allows clients to roam between APs without repeating the full 802.1X/EAP authentication process.
OKC was proposed by vendors (not the IEEE or Wi-Fi Alliance), so there was no formal certification early on.
This led to inconsistent and delayed client support, preventing widespread adoption.
Incorrect:
A). OKC does not involve inter-controller roaming in most scenarios; it's a local caching method.
C). The cryptographic overhead was not a significant barrier compared to lack of standardization.
D). OKC was not defined in IEEE 802.11r-Fast BSS Transition (FT) was.
References:
CWSP-208 Study Guide, Chapter 6 (Fast Secure Roaming)
CWNP Wireless Mobility Standards Overview

NEW QUESTION # 123
Given: In a security penetration exercise, a WLAN consultant obtains the WEP key of XYZ Corporation's wireless network. Demonstrating the vulnerabilities of using WEP, the consultant uses a laptop running a software AP in an attempt to hijack the authorized user's connections. XYZ's legacy network is using 802.11 n APs with 802.11b, 11g, and 11n client devices.
With this setup, how can the consultant cause all of the authorized clients to establish Layer 2 connectivity with the software access point?
  • A. A higher SSID priority value configured in the Beacon frames of the consultant's software AP will take priority over the SSID in the authorized AP, causing the clients to reassociate.
  • B. When the RF signal between the clients and the authorized AP is temporarily disrupted and the consultant's software AP is using the same SSID on a different channel than the authorized AP, the clients will reassociate to the software AP.
  • C. If the consultant's software AP broadcasts Beacon frames that advertise 802.11g data rates that are faster rates than XYZ's current 802.11b data rates, all WLAN clients will reassociate to the faster AP.
  • D. All WLAN clients will reassociate to the consultant's software AP if the consultant's software AP provides the same SSID on any channel with a 10 dB SNR improvement over the authorized AP.
Answer: B
Explanation:
Clients seek connectivity when their connection is lost. If the attacker broadcasts a matching SSID on a different channel and the client is disconnected (via RF jamming or deauthentication), the client will often reassociate with the stronger signal or first-responding AP broadcasting the same SSID, even if it's rogue.
Incorrect:
A). SNR alone doesn't force reassociation-clients consider multiple factors.
B). SSID priority is not a standardized field influencing client behavior.
D). Clients won't reassociate based purely on advertised data rates unless connectivity is disrupted and other AP parameters are more attractive.
References:
CWSP-208 Study Guide, Chapter 5 (Hijacking and Evil Twin Attacks)
CWNP Roaming Behavior and Signal Loss Analysis
IEEE 802.11-2016 Standard (Association and Reassociation Behavior)

NEW QUESTION # 124
......
We are dedicated to help you pass the exam and gain the corresponding certificate successful. CWSP-208 exam cram is high-quality, and you can pass your exam by using them. In addition, CWSP-208 exam braindumps cover most of knowledge points for the exam, and you can also improve your ability in the process of learning. You can obtain the download link and password within ten minutes, so that you can begin your learning right away. We have free update for 365 days if you buying CWSP-208 Exam Materials, the update version for CWSP-208 exam cram will be sent to your email automatically.
Exam CWSP-208 Online: https://www.testpassking.com/CWSP-208-exam-testking-pass.html
BONUS!!! Download part of TestPassKing CWSP-208 dumps for free: https://drive.google.com/open?id=1cKP_T08lxuzf81cMV2tOGgw72vwUyWtf
https://www.it-passports.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list