Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Core Board › Core-3566JD4› 2026 CWSP-208: Perfect Certified Wireless Security P ...
New Topic
Print Previous Topic Next Topic

2026 CWSP-208: Perfect Certified Wireless Security Professional (CWSP) Questions

jimshaw961

128

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
128

2026 CWSP-208: Perfect Certified Wireless Security Professional (CWSP) Questions

Posted at 9 hour before      View：18 | Replies：0        Print      Only Author   [Copy Link] 1#
DOWNLOAD the newest ITExamSimulator CWSP-208 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1UHBsk6Xo2CyvGVfPLDkY9buI_OWRMqBS
Preparing for the exam may be not an easy thing for some candidates, if you choose us, we will do the things for you, what you need to do is practicing. We offer you free demo for CWSP-208 training materials, you can have a try before buying. And you will receive the downloading link and password within ten minutes after purchasing the CWSP-208 Exam Dumps. In addition, we have after-service stuff to resolve the confusions you have. If you fail to pass the exam, we are money back guaranteed, or if you have other exam to attend, we can also replace other 2 valid exam dumps for you.
CWNP CWSP-208 Exam Syllabus Topics:
TopicDetails
Topic 1
  • WLAN Security Design and Architecture: This part of the exam focuses on the abilities of a Wireless Security Analyst in selecting and deploying appropriate WLAN security solutions in line with established policies. It includes implementing authentication mechanisms like WPA2, WPA3, 802.1X
  • EAP, and guest access strategies, as well as choosing the right encryption methods, such as AES or VPNs. The section further assesses knowledge of wireless monitoring systems, understanding of AKM processes, and the ability to set up wired security systems like VLANs, firewalls, and ACLs to support wireless infrastructures. Candidates are also tested on their ability to manage secure client onboarding, configure NAC, and implement roaming technologies such as 802.11r. The domain finishes by evaluating practices for protecting public networks, avoiding common configuration errors, and mitigating risks tied to weak security protocols.
Topic 2
  • Vulnerabilities, Threats, and Attacks: This section of the exam evaluates a Network Infrastructure Engineer in identifying and mitigating vulnerabilities and threats within WLAN systems. Candidates are expected to use reliable information sources like CVE databases to assess risks, apply remediations, and implement quarantine protocols. The domain also focuses on detecting and responding to attacks such as eavesdropping and phishing. It includes penetration testing, log analysis, and using monitoring tools like SIEM systems or WIPS
  • WIDS. Additionally, it covers risk analysis procedures, including asset management, risk ratings, and loss calculations to support the development of informed risk management plans.
Topic 3
  • Security Policy: This section of the exam measures the skills of a Wireless Security Analyst and covers how WLAN security requirements are defined and aligned with organizational needs. It emphasizes evaluating regulatory and technical policies, involving stakeholders, and reviewing infrastructure and client devices. It also assesses how well high-level security policies are written, approved, and maintained throughout their lifecycle, including training initiatives to ensure ongoing stakeholder awareness and compliance.
Topic 4
  • Security Lifecycle Management: This section of the exam assesses the performance of a Network Infrastructure Engineer in overseeing the full security lifecycle—from identifying new technologies to ongoing monitoring and auditing. It examines the ability to assess risks associated with new WLAN implementations, apply suitable protections, and perform compliance checks using tools like SIEM. Candidates must also demonstrate effective change management, maintenance strategies, and the use of audit tools to detect vulnerabilities and generate insightful security reports. The evaluation includes tasks such as conducting user interviews, reviewing access controls, performing scans, and reporting findings in alignment with organizational objectives.

CWNP CWSP-208 Exam | CWSP-208 Questions Answers - High-effective Company for CWSP-208: Certified Wireless Security Professional (CWSP) ExamWith our software version of our CWSP-208 guide braindumps, you can practice and test yourself just like you are in a real exam for our CWSP-208 study materials have the advandage of simulating the real exam. The results of your CWSP-208 Exam will be analyzed and a statistics will be presented to you. So you can see how you have done and know which kinds of questions of the CWSP-208 exam are to be learned more.
CWNP Certified Wireless Security Professional (CWSP) Sample Questions (Q105-Q110):NEW QUESTION # 105
You are using a protocol analyzer for random checks of activity on the WLAN. In the process, you notice two different EAP authentication processes. One process (STA1) used seven EAP frames (excluding ACK frames) before the 4-way handshake and the other (STA2) used 11 EAP frames (excluding ACK frames) before the 4- way handshake.
Which statement explains why the frame exchange from one STA required more frames than the frame exchange from another STA when both authentications were successful? (Choose the single most probable answer given a stable WLAN.)
  • A. STA1 and STA2 are using different EAP types.
  • B. STA1 is a TSN, and STA2 is an RSN.
  • C. STA1 is a reassociation and STA2 is an initial association.
  • D. STA1 and STA2 are using different cipher suites.
  • E. STA2 has retransmissions of EAP frames.
Answer: A
Explanation:
Different EAP types involve varying numbers of exchanges:
EAP-TLS, for example, involves more exchanges due to certificate negotiation.
EAP-MD5 or PEAP might involve fewer steps.
Thus, the most likely reason for different frame counts during successful authentication is the use of different EAP types.
Incorrect:
A). Cipher suites are negotiated after EAP, not during it.
B). Retransmissions would typically cause noticeable delay and not result in exactly 11 frames.
C). Reassociation does not significantly reduce EAP frame count.
D). RSN/TSN differences are not directly related to EAP exchange length.
References:
CWSP-208 Study Guide, Chapter 4 (EAP Protocol Operation)
IEEE 802.1X and EAP Behavior Documentation

NEW QUESTION # 106
Which of the following security attacks cannot be detected by a WIPS solution of any kind? (Choose 2)
  • A. Social engineering
  • B. Eavesdropping
  • C. DoS
  • D. Rogue APs
Answer: A,B
Explanation:
Wireless Intrusion Prevention Systems (WIPS) are excellent for detecting on-air threats such as rogue APs, DoS attacks, spoofing, and misconfigured devices. However, WIPS cannot detect:
C). Eavesdropping - Passive listening on wireless transmissions cannot be detected because no signal is transmitted by the attacker.
D). Social engineering - Human-based attacks like phishing or pretexting fall outside the scope of wireless monitoring.
Incorrect:
A). Rogue APs can be detected via MAC address comparison, frame analysis, and signal triangulation.
B). DoS attacks, such as deauth floods or RF jamming, can be detected with appropriate WIPS sensors.
References:
CWSP-208 Study Guide, Chapter 5 (WLAN Threats and Attacks)
CWNP WIPS Implementation Guidelines
CWNP Whitepapers on Wireless Threat Detection Capabilities

NEW QUESTION # 107
When used as part of a WLAN authentication solution, what is the role of LDAP?
  • A. A role-based access control protocol for filtering data to/from authenticated stations.
  • B. An Authentication Server (AS) that communicates directly with, and provides authentication for, the Supplicant.
  • C. A data retrieval protocol used by an authentication service such as RADIUS
  • D. An IEEE X.500 standard compliant database that participates in the 802.1X port-based access control process
  • E. A SQL compliant authentication service capable of dynamic key generation and distribution
Answer: C
Explanation:
LDAP (Lightweight Directory Access Protocol) is used to query and retrieve user credential information from a directory service (like Microsoft Active Directory).
It's not an authentication protocol itself but is used by services like RADIUS to validate user credentials during the EAP authentication process.
Incorrect:
B). LDAP is not directly compliant with X.500-it uses a simplified subset.
C). LDAP is not a SQL-compliant protocol.
D). LDAP is not a role-based access control mechanism.
E). LDAP is not an Authentication Server by itself.
References:
CWSP-208 Study Guide, Chapter 4 (LDAP Integration with RADIUS)
CWNP AAA Architecture Overview

NEW QUESTION # 108
Given: You are the WLAN administrator in your organization and you are required to monitor the network and ensure all active WLANs are providing RSNs. You have a laptop protocol analyzer configured.
In what frame could you see the existence or non-existence of proper RSN configuration parameters for each BSS through the RSN IE?
  • A. Data frames
  • B. CTS
  • C. Probe request
  • D. Beacon
  • E. RTS
Answer: D
Explanation:
The RSN (Robust Security Network) Information Element (IE) is used to advertise the security capabilities of a wireless network, particularly for WPA2 and WPA3 networks. This RSN IE is contained in Beacon and Probe Response management frames, not in Probe Request, RTS, CTS, or Data frames. The Beacon frame is sent periodically by an AP to announce its presence and includes critical information about the BSS, including security settings like the RSN IE.
You would use a protocol analyzer to capture Beacon frames and inspect the RSN IE field to confirm if a BSS is properly configured to use RSN protections such as WPA2-Enterprise or WPA2-Personal.
References:
CWSP-208 Study Guide, Chapter 6 - WLAN Discovery & Enumeration
CWNP CWSP-208 Objectives: "802.11 Frame Analysis" and "Understanding RSN Information Element Fields"

NEW QUESTION # 109
What is one advantage of using EAP-TTLS instead of EAP-TLS as an authentication mechanism in an 802.11 WLAN?
  • A. EAP-TTLS does not require an authentication server, but EAP-TLS does.
  • B. EAP-TTLS supports client certificates, but EAP-TLS does not.
  • C. EAP-TTLS sends encrypted supplicant credentials to the authentication server, but EAP-TLS uses unencrypted user credentials.
  • D. EAP-TTLS does not require the use of a certificate for each STA as authentication credentials, but EAP- TLS does.
Answer: D
Explanation:
EAP-TLS requires both server and client-side digital certificates, which adds complexity in client certificate management.
EAP-TTLS uses a server certificate to establish a secure TLS tunnel, after which user credentials (e.g., username/password) are sent inside the encrypted tunnel. No client certificate is needed.
Incorrect:
A). EAP-TLS also encrypts credentials using TLS.
B). EAP-TLS supports client certificates (it's the core requirement).
C). Both EAP methods require an authentication server.
References:
CWSP-208 Study Guide, Chapter 4 (EAP Methods Comparison)
CWNP EAP-TTLS Deployment Guide

NEW QUESTION # 110
......
ITExamSimulator offers accurate and reliable study materials to help you prepare for the CWNP CWSP-208 Exam. They have prepared the best CWNP CWSP-208 Exam Questions that provide authentic and reliable material. With ITExamSimulator, many candidates have succeeded in passing the CWNP CWSP-208 Exam.
CWSP-208 Study Test: https://www.itexamsimulator.com/CWSP-208-brain-dumps.html
2026 Latest ITExamSimulator CWSP-208 PDF Dumps and CWSP-208 Exam Engine Free Share: https://drive.google.com/open?id=1UHBsk6Xo2CyvGVfPLDkY9buI_OWRMqBS
https://www.validbraindumps.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list